CLNTR - UG-3313, REMANUFACTURED (BLACK)

  • MSDS: CLNTR
  • Manufacturer: AMERICAN LASER INC
  • Product Name: UG-3313, REMANUFACTURED (BLACK)
  • National Stock Number: 6850-01-472-3859
Product Identification

Product ID:UG-3313, REMANUFACTURED (BLACK)
MSDS Date:02/04/2001
FSC:6850
NIIN:01-472-3859
Status Code:A
MSDS Number: CLNTR

Responsible Party
AMERICAN LASER INC
5004 JACKSON STREET
HYATTSVILLE, MD 20781
US

Emergency Phone: 800-258-6637

Info Phone: 800-258-6637/ 301-588-4850

Cage: UO458

Contractor
AMERICAN LASER INC
HYATTSVILLE, MD 20781 US

Telephone: 800-258-6637/ 301-588-4850

Cage: UO458

Ingredients

STYRENE ACRYLATE COPOLYMER


IRON OXIDE

CAS: 1317-61-9


SALICYLIC ACID CHROMIUM CHELATE

CAS: 72869-85-3

OSHA PEL 0.5 MG (CR)/M3

ACGIH TLV: 0.5 MG (CR)/M3

Hazards

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER POWDER IS NOT ACCESSIBLE UNLESS
THE CARTRIDGE IS FORCED TO BE BROKEN. INHALATION: GASPING. DO NOT
BREATHE THE DUST. EYE CONTACT: NO SPECIFIC HAZARD IS KNOWN TO
AMERICAN LASER. HOWEVER, ANY MATER IAL THAT CONTACTS THE EYE MAY BE
IRRITATING. SKIN: LOW HAZARD FOR INDUSTRIAL HANDLING. DO DATA
AVAILABLE FOR CHRONIC EFFECTS OF OVEREXPOSURE.TOXICITY DATA:
NEGATIVE MUTAGENICITY (TEST SPECIES: S. TYPH IMUNIUM).
Explanation of Carcinogenicity:EACH INGREDIENT IS NOT LISTED ON NTP
THIRD ANNUAL REPORT ON CARCINOGENS, IARC MONOGRAPH OR OSHA LISTING.
Effects of Overexposure:INHALATION: GASPING. EYE CONTACT: IRRITATION.

First Aid

First Aid:EYE CONTACT: FLUSH WITH PLENTY OF WATER.

Fire Fighting

Lower Limits:COMBUSTIBLE
Upper Limits:COMBUSTIBLE
Extinguishing Media:CO2, WATER, DRY CHEMICALS.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TONER MATERIAL, LIKE MOST ORGANIC
MATERIAL IN POWDER FORM, IS CAPABLE OF CREATING DUST EXPLOSION.
REFER TO USA-NFPA PAMPHLET NO. 643 "STANDARD FOR THE PREVENTION OF
FIRE AND DUST EXPLOSION IN THE CHEM ICAL, DYE, PHARMACEUTICAL, AND
PLASTICS INDUSTRY", IF THIS MATERIAL IS TO BE REDUCED OR COLLECTED
AS A POWDER.

Accidental Release

Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATION
OF HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF THE DUST.
SWEEP MATERIAL ONTO PAPER AND PLACE IN FIBER CARTON. PACKAGE
APPROPRIATELY FOR SAFE FEED TO AN INCINERATOR OR DISSOLVE IN
COMPATIBLE WASTE SOLVENTS PRIOR TO INCINERATION.

Handling

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT WITH OXIDIZING MATERIALS.

Exposure Controls

Respiratory Protection:NONE REQUIRED.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:NOT AVAILABLE
Melt/Freeze Pt:M.P/F.P Text:100-150 DEGREES C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4 - 1.5
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS POWDER WITH SLIGHT PLASTIC ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND PROBABLY CARBON
MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSE IN AN APPROPRIATE INCINERATOR OR
CONTRACT WITH LICENSED DISPOSAL AGENCY. DISPOSAL MAY BE SUBJECT TO
FEDERAL, STATE, OR LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.